Navigate:

Advice
Beginners
BIOS Guide
CPUs
Links
Mainboards
Memory
Network
Storage
Video/Sound Cards

Contact
Forum
SiteMap
Sponsors
WebNews
Home

Xoxide Computer Mods
. .

Prices:

Mainboards

ABIT
ASUS
Chaintech
Shuttle
Soyo
Tyan

CPU
Intel
P4 2.4C-800
P4 2.6C-800
P4 2.8C-800
P4 3.0-800
P4 3.2-800

AMD
AthlonXP
XP 1700+
XP 2000+
XP 2400+
XP 2500+
XP 2700+
XP 3000+
XP 3200+

Athlon64
Athlon64 3200+
Athlon64 FX-51

Opteron
Opteron 240
Opteron 242
Opteron 244
Opteron 246

Memory

Corsair
Crucial
Kingston
Mushkin
OCZ

Search Prices:


























































































































LOSTCIRCUITS

SHORTCUTS:
Out of Copenhagen
Test Configurations
Memory Subsystem
Power Consumption
3D Rendering Energy Efficiency
Cinebench
AV Encoding: DVD-Shrink, DrDivX, MainConcept
AV Encoding: Virtualdub / DivX and SSE4
Gaming: 3DMark '06
FarCry
F.E.A.R.
Overclocking
Final Words

Give Us Some Feedback on this Review

 Intel's Penryn Core Turns Yorkfield at 3.0 GHz
P1266 at 45nm, 12 MB L2 Cache, and SSE4 Instruction Set
(Review by MS, October 28, 2007)

Overclocking

Overclocking is usually not the strongest aspect of Intel's quad core processors but especially in the case of a new die, it is certainly of interest to look at how far it can be pushed within the envelope of allowed settings. According to the data sheet, Intel allows core and termination voltage up to 1.45 V, which is where we drew the line. At default (1.3VCC), we pushed the 3GHz sample to 3.9 GHz without running into any stability issues. Increasing the core voltage to 1.45 V allowed us to push a bit higher, namely to 4.2 GHz at which frequency Orthos was running completely stable. Above 4.2 GHz, the system showed a few stability problems but we still managed to get into Windows and run Prime95 as fast as 4.4 GHz.

Particularly noteworty are the core temperature readings we saw using CoreTemp.

At idle, the core temperatures were just above ambient RT. Hint: it was not the Intel stock cooler we were using!

Prime95 was running to get the CPU out of the C1 state and running at full frequency. Note the 11 x multiplier used, which is available only in unlocked samples, even though the core does support multipliers up tp 15x as mentioned on the first page of this article.


(BX80557E6300)

next page: => Final Thoughts =>

All advice and educational articles on LostCircuits are free, but if you feel you can, please make a small donation to us!
Thank you!

General disclaimer: This page only reflects the author's personal opinion and assumes no responsibility whatsoever regarding any of the contents or any damages that may occur explicitly or implicitly from reading the contents of this site. All names and trademarks mentioned in this review are the exclusive property of the respective parent companies.
All contents of this site are protected by international copyright laws. Reproduction of the contents even in parts is not allowed except after written permission by the author and referral to this site.
Copyright 2002 - 2008 LostCircuits